Is the pasting and application process of reflective TPU transfer label easy and fast?
Publish Time: 2025-01-20
Reflective TPU transfer label is a special label material widely used in scenes that require high visibility and safety, such as outdoor sports equipment, traffic signs, night wear clothing, etc. It is designed so that the label can be easily pasted through the transfer adhesive layer on the back, providing an easy and fast application method.
1. Preparation
Clean surface: Before pasting reflective TPU transfer label, make sure the surface to be pasted is clean, dry and free of oil or dust. You can use a cleaning cloth or alcohol to wipe the surface to ensure that the label can adhere firmly.
Choose the right temperature: TPU material is sensitive to temperature. It is recommended to operate at room temperature and avoid pasting in extreme temperature (too high or too low) environment to avoid affecting the bonding effect.
2. Pasting process of transfer label
Peel off the backing paper: Carefully peel off the backing paper (usually the yellow adhesive layer protective paper) of the reflective TPU transfer label. Be careful not to touch the adhesive layer when peeling to avoid affecting the stickiness.
Align the position: Align the transfer label to the position where it needs to be pasted, and ensure that the pattern or text of the label is in the correct direction.
Light pressure pasting: Use your fingers or soft cloth to gently press the surface of the label, and apply force evenly from the center to the outside to make the label fully contact with the target surface.
Peel off the transfer film: After the label is fully pasted, carefully peel off the transparent transfer film (usually a layer of transparent PET film) on the back of the label. Peeling should be slow and even to avoid damaging the label.
Check the pasting effect: Confirm whether the label is firmly pasted and whether there are bubbles or warping on the edge. If there are bubbles, you can use a soft cloth to gently press to remove the air.
3. Simple and fast advantages
No additional tools are required: The pasting process of reflective tpu transfer label does not require special tools or equipment, and can be completed by manual operation, which is very convenient.
Fast pasting: Due to the design of the transfer label, the pasting process usually only takes a few minutes, which is suitable for mass production and fast application scenarios.
Strong adaptability: TPU material has good flexibility and weather resistance, can adapt to various complex surface shapes (such as curved surfaces, fabrics, etc.), and is not easy to fall off after pasting.
No need for heat pressing or glue: Unlike traditional labels, reflective TPU transfer labels do not require heat pressing or additional glue application, simplifying the pasting steps.
4. Application scenarios
Outdoor sports equipment: such as cycling jerseys, mountaineering backpacks, sports shoes, etc., reflective TPU labels can provide visibility and safety at night.
Traffic safety signs: used for vehicle identification, traffic vests, warning signs, etc., to improve recognition at night or in low-light environments.
Clothing decoration: used for fashion items such as clothing and hats to enhance design and functionality.
Industrial identification: used for identification on tools, equipment or packaging to enhance recognition and durability.
The pasting and application process of reflective TPU transfer labels is very simple and fast. Its design makes the pasting process only require peeling off the backing paper and transfer film, without additional tools or complex steps, which is very suitable for fast application and efficient production. The flexibility and weather resistance of TPU materials further enhance the practicality and durability of the label, making it an ideal choice for a variety of scenarios requiring high visibility and safety.
